CH750-0026

LP#: CH750-0026
27hp Kohler Command Engine, Horizontal 1-1/8"x2-3/4" Keyed Shaft, OHV, Electric Start, 15 Amp Alternator, 1" Diameter Flywheel stub shaft, Cyclone Air Cleaner, made for Exmark LZ30KC605-LZ30KC665-LZ30KC725, and replaces CH730-0003, CH730-0129, CH740-0007, CH740-0045, CH740-0054, CH740-0075, CH740-3117
$2,749.00

In Stock:27

Additional Shipping Cost $139.99
(Maximum surcharge listed. See actual total in cart.)

Item Specifications

Item Specifications

  • Kohler Command Pro Series
  • 27hp
  • Command
  • Valve Type: Overhead Valve
  • Sleeved Bore: Yes
  • Mounting: Horizontal
  • Engine Displacement (cc): 747
  • Starter Type: Electric Start
  • Alternator: 15 Amp
  • Oil Capacity: 2 qts
  • Fuel Pump: Yes
  • Shaft Size: 1-1/8"Dx2-3/4"L
  • Stub Shaft: 1"D
  • Muffler: Not Included
  • Shipping Rate Weight: 151
  • Product Condition: New
  • Warranty: 3-Year Manufacturer's Warranty

Notes and Warnings
  • Front PTO Drive Shaft 1" diameter (PN 2475508-S).
  • Same wiring harness as CH730-0003, CH730-0129, CH740-0007, CH740-0045, CH740-0054, CH740-0075, CH740-3117
  • The gross power rating is measured in accordance with SAE J1995 at 3600 rpm (without the muffler and air filter in place). Torque values are derived at 2600 rpm. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.

Fits These Models
  • Exmark LZ30KC605 Serial 600000 thru 669999
    Exmark LZ30KC665 Serial 600000 thru 669999
    Exmark LZ30KC725 Serial 600000 thru 669999


Replaces These Items
  • Replaces Previous Kohler CH750-0010 (aka Spec 68543) Replaces 68543, 68606, 68695, CH730-0003, CH730-0129, CH740-0007, CH740-0045, CH740-0054, CH740-0075, CH740-3117 Exmark LZ30KC605 Serial 600000 thru 669999 Exmark LZ30KC665 Serial 600000 thru 669999 Exmark LZ30KC725 Serial 600000 thru 669999