Cub Cadet 3000 Mower, Lawn and Garden Tractor Category
Original Model: Kohler Command Various
This came with various engines including CH18S-62599 and CH22S-66549. The shaft on this is 1-1/8" x 2-3/4". Any engine you buy may requre parts from your original engine or modifications. If you buy one with a longer shaft, you can cut it as needed or add a sleeve at the end to hold the electric clutch on. If you use either the CH620-0017 or CH740-0124 engines, there may be minor differences like wiring, air breather, throttle and choke controls. Parts should be interchangeable as needed. The shaft is 4" long but can be cut down as needed.
Parts List
10 ProductsEngines
CH620-3119
19hp Horizontal 1 1/8" x 4" Shaft, Command OHV, Fuel Pump, Key Switch, Muffler, Supersedes CH620-3017, Kohler Engine
CH620-3149
19hp Kohler Command Series Engine, Horizontal 1 1/8" x 3 11/32" Shaft, Electric Start, 15 Amp Alternator, Fuel Pump, Center Muffler
Mowing Blade
MTD-94204053C
17.90" STANDARD BLADE FOR I1050, LT1050, (S)LTX1050, RZT50. FITS MOST CURRENT 50" CUT RIDERS WITH STAMPED STEEL DECKS MADE BY MTD
MTD-9420640
MTD HI-LIFT BLADE-W/STAR.FITS 20" MTD BRAND WALK BEHIND MOWERS. FOR MULCHING BLADE USE 942-0740 MTD Lawnmower Parts
MTD-9420642A
942-0642A MTD HI-LIFT BLADE-W/STAR. FITS 22" MTD BRAND WALK BEHIND MOWERS. FOR MULCHING BLADE USE 942-0742 MTD Lawnmower Parts
MTD-9420645
MTD Blade, 16.28" Long, Star 2-in-1,HI-LIFT VERSION OF 942-04124. *aftermarket option OR-98069
MTD-9420740
942-0740 MTD MULCHING BLADE, FITS MOST 20" MTD BRAND WALK-BEHIND MOWERS. FOR HI-LIFT BLADE USE 942-0640 MTD Lawnmower Parts * aftermarket option STE-30030
STE-300300
300-300 STENS 300-300, Universal 20" Blade Stens Lawnmower Parts
Questions? Email us directly:
General Disclaimer
While we may have sold many engines listed above to be used for a Cub Cadet 3000 Mower, Lawn and Garden Tractor Category, we are NOT claiming these are exact replacements unless the product notes explicitly say so. Many original equipment engines may no longer be in production because of obsolescence or EPA regulations, so in some cases there may not be an exact replacement available. Our intention here is to show that other customers have utilized these in the equipment shown, but may have had to make some modifications to do so. If we know of any required changes, we will list those, however, some adapting during installation should be expected.