9.50 Ft. Lbs. Torque, Horizontal 3/4"x2-27/64" Shaft, Dual Ball Bearing, Briggs & Stratton Engine

In Stock:11

Item Specifications

Item Specifications

  • 9.5 Ft. Lbs. Torque
  • Ball Bearing
  • Valve Type: Overhead Valve
  • Sleeved Bore: Yes
  • Mounting: Horizontal
  • Starter Type: Recoil pull start only
  • Alternator: None
  • Fuel Tank Capacity: 0.8 gallon (3 liter)
  • Shaft Size: 3/4"Dx2-27/64"L
  • Muffler: Included
  • Throttle Type: Manual
  • Choke Type: Manual
  • Shipping Rate Weight: 44.38
  • Product Condition: New
  • Warranty: 2-Year Manufacturer's Warranty

Notes and Warnings
  • This is the same physical size as the 6.5HP Intek OHV engines
  • The gross power rating is measured in accordance with SAE J1995 at 3600 rpm (without the muffler and air filter in place). Torque values are derived at 2600 rpm. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.