Browse by Manufacturer
Browse Categories



Your Price: $3,490.00
Item Number: 852096KIT
96 inch Salt Dogg Carbon Steel Hopper Spreader with Standard Length Spinner & Chute Assembly

  • Completely self-contained unit designed for ice and snow control.The rugged design allows for use with salt, sand and other materials. The complete assembly mounts easily on pickup, dump and platform trucks making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.

  • Electrically welded 12-gauge ends and steel sides sloped at 45 are constructed with channel formed top edges. Each side of the hopper has two 12-guage vertical supports to add extra strength to the unit. The single lift point on the cross support beam is located at the unit s center of gravity to allow for easy loading and unloading. The floor is constructed of 10-gauge steel.

  • The conveyor is made of 12 wide all-steel pintle chain with 3/16 inch x 3/4 inch cross bars. Chain strength is 11,000 lbs.per strand; 22,000 lbs. total weight. The drive sprockets are 6-foot cast iron, on a 1-1/8 inch diameter shaft. The conveyor chain has an adjustment range of 3-1/2". The drive shaft has heavy-duty, sealed, self-aligning ball bearings with grease fittings. The idler drum has heavy-duty 1" diameter ball bearings.

  • Gear is constructed of aluminum bronze, worm gear is hardened steel and ground. Housing is made of durable cast iron. Gear ratio is 20:1 with 1 inch input shaft and 1-1/8 inch output shaft on tapered roller bearings.

  • Lever operated with a friction lock for accurate adjustment.

  • A polymer disc with four fins is connected to a 3/4"diameter shaft secured on two pillow block bearings. The spreading material is guided from the conveyor to the spinner plate through an enclosed 12-gauge chute with internal and external deflectors. Adjustable deflectors allow for complete directional spread control and full or compact spread. Total spread radius ranges from 2' to 25'. The extra wide rear deflector protects the rear and under carriage of the vehicle.

  • Heavy-duty 10 horsepower Tecumseh engine. Engine comes equipped with alternator and 12 volt electric starter with incab start/stop and electric throttle control (standard). Entire engine is completely protected by the convenient hinged hood.

  • Throttle control unit allows for full-range of throttle settings,including idle and full choke,via the in-cab hopper control box. Use of electric throttle control eliminates cable freezing,binding and breaking.

  • 12 volt DC electric clutch has a three-position in-cab switch, for greater control and material economy. Also allows for low speed operation and spot spreading.

  • Recommended Use: 3/4 or 1-Ton Trucks.

Ships F.O.B.

*This item will incur additional freight. See Shipping & Terms for additional details.*

Product Reviews

(0 Ratings, 0 Reviews)
  Call Us

  Email Us

  Visit Us
  18B Ford Products Road
  Valley Cottage, NY 10989
  Local 845-356-8300

  M-F 8:00-5:00 EST
  Sat 9:00-1:00 EST